News

Starting with Creo 4.0 I have now also added the Model Based Definition 3D mode drawing setup options.

They are marked in the list as (Also MBD) or (Only MBD)

E.G.
ARROW_STYLE (Also MBD)
ARROW_WIDTH_RATIO (Only MBD)

I have now also made all hidden drawing detail setup options available starting from Creo Parametric 4.0.

Undocumented options like default_note_leader_type and symbol_font can now at least be found.

See the complete lists here

The Configuration options have been added or updated for the following releases:

Creo Parametric 9.0.0.0
Creo Parametric 8.0.4.0
Creo Parametric 7.0.8.0

Check it out at Configuration

The site has been updated to be able to upload Creo Parametric 9.0 results.

See the first results here

Happy testing 😉

The Configuration options have been updated for the following releases:

• Creo Parametric 8.0.3.0
• Creo Parametric 7.0.7.0

Check it out at Configuration

The Configuration options have been updated for the following releases:

• Creo Parametric 8.0.2.0
• Creo Parametric 7.0.6.0

Check it out at Configuration

The Configuration options have been added or updated for the following releases:

Creo Parametric 8.0.0.0
…
Creo Parametric 4.0 M150

Check it out at Configuration

Changed blended_transparency from no to independent in the config.pro

Since Creo 7.0 the blended transparency could no longer be selected through the ui. This made the Advanced shade mode tests perform with the top 2 assemblies completely invisible. Resulting in a small (incorrect) performance improvement. And overall even a performance decrease.

For Creo 7.0 and 8.0 this new setting must be in the config.pro. The count tool on this site now disables uploads for these Creo versions with the previous benchmark version (7.0)

If you have already uploaded Creo 7.0 results I urge you to rerun them with this new benchmark version.

The Configuration options have been updated to the following releases:

Creo Parametric 7.0.3.0
Creo Parametric 6.0.6.0

Check it out at Configuration

The Configuration options have been updated to the following releases:

Creo Parametric 7.0.2.0
Creo Parametric 6.0.5.1
Creo Parametric 5.0.6.0
Creo Parametric 4.0 M140

Check it out at Configuration